Wind technicians, or wind turbine technicians, are crucial to ensuring that wind energy can be converted into electricity and then distributed by electrical grids. Wind techs are both technically savvy and physically fit to perform well in this role.
Wind turbines typically have three major parts - the tower with three blades, a nacelle (an outer casing with a generator and gearbox), and brakes to slow it down. Wind turbine technicians usually install and repair the components of these turbine parts, using several tools as well as computers to test for malfunctions and diagnose issues.
Most of the equipment related to turbine monitoring is in the nacelle, which can be accessed both onsite or remotely. For example, on the nacelle, they might have to replace the instruments that measure wind speed and direction or work with large cranes for component repair or replacement.
In this career, wind energy technicians specialize in the installation, maintenance, and operation of wind turbines both onshore and offshore. They perform routine maintenance to keep the turbines running. The technicians also respond when the wind turbines are not working properly and are charged with repairing them. They could be responsible for managing a single turbine or hundreds of them on a wind farm. In addition, wind techs are often responsible for ordering spare turbine parts, keeping track of the inventory, or overseeing turbine operations.
If wind turbines are not working, that means less energy for the grid. As such, it is common for wind energy technicians to be on call and work during evenings and weekends to keep them generating energy. Next to being able to work in a variety of conditions outdoors, wind technicians should not be afraid of heights and comfortable with working in confined spaces.
Given the increasing rise in the use of sustainable energies, wind turbine techs have a promising job outlook in the renewable energy sector for years and decades to come.
Apply now for a job as a wind technician!
Systemingenieur Primärtechnik - Windenergie (w/m/d)
Location: Rostock
Branche: Renewable Energy
Expertise: Research & Development
Experience: 2 years
In Ihrer Position übernehmen Sie die selbstständige Analyse und Planung primärtechnischer Einrichtungen in Schaltanlagen. Dabei erstellen Sie primärtechnische Konzepte (u.a. Umbauabläufe, Netzberechnungs- & Isolationskoordinationsstudien) für Neu-, Aus- und Umbauten von luftisolierten und gasisolierten Schaltanlagen sowie Blindleistungskompensationsanlagen. Angebots- und Projektdokumentation für die Primärtechnik (u.a. Aufbaupläne, behördliche Genehmigungsplanung, MS-/HS-Kabeldokumentation, Integration von Stahl-/Bautechnik) werden von Ihnen erstellt und ausgesteuert. Auch das Schnittstellenmanagement bei 420kV-Hybridprojekten einschl. Kabel-/Schalt- /Kompensationsanlagen und Leitungsbau fällt in Ihren Verantwortungsbereich. Hochspannungskomponenten (AIS; GIS; Kabel, Kompensationsanlagenkomponenten) werden von Ihnen koordiniert und abgenommen. Zudem steuern Sie eigenverantwortlich die Umsetzung in Zusammenarbeit mit der Projektausführung.
Quality Technician
Location: Hengelo OV
Branche: Machine & Plant Design
Expertise: Production & Manufacturing
Experience: 2 years
De Quality Technician (QT) werkt ter ondersteuning van de productieafdelingen. Hij/zij is in de kern verantwoordelijk dat producten volgens specificatie aan de (interne) klant geleverd worden. Dit doet hij/zij door middel van controle (proces, product, persoon en documentatie) en corrigeren (proces, persoon) om zo de kwaliteit te bewaken en garanderen. Daarnaast kent de QCT een preventieve rol, bijvoorbeeld door het doen van interne audits. De belangrijkste taken zijn: Als Quality technician toets je HSV's, DIN en ISO normen in de productieomgeving, en maak en beheer je checklisten, zodat je collega's altijd met de meest recente checklisten werken. Je geeft gevraagd en ongevraagd advies op de werkvloer, toetst regelmatig de procesvoortgang en geef constructieve feedback via formele en informele overlegstructuren. Daarnaast registreer je afkeuringen en afwijkingen in producten tijdens de productie, plan en organiseer MRB's voor stakeholders en ondersteun je IGK bij controle van magazijn en voorraden. Daarnaast ben je, door deelname aan PRR en FAI, verantwoordelijk voor het inschatten van kwaliteitsrisico’s bij nieuwe systemen, het toetsen van documentatie en het borgen van veiligheid en praktische haalbaarheid van de routing.
Structural Engineer Offshore Wind
Location: Zoetermeer
Branche: Renewable Energy
Expertise: Research & Development
Experience: 2 years
Als Structural Engineer speel je een sleutelrol in het ontwerp en de uitvoering van essentiële structuren en installaties binnen onze offshore projecten. In deze uitdagende functie ben je verantwoordelijk voor het ontwikkelen en uitvoeren van berekeningen en tekeningen voor installaties, zoals grillages, seafastening en hijsapparatuur. Je werkt nauw samen met projectteams en klanten om de beste oplossingen te realiseren. Jouw belangrijkste verantwoordelijkheden zijn:Het uitvoeren van structurele berekeningen en ontwerpen, van concept tot detail, voor grillages, zeeverankering, hijspunten en installatiehulpmiddelen.Het opstellen en beoordelen van gedetailleerde tekeningen en berekeningen voor projectonderwerpen zoals rigging, pad-eyes, barge grillages, etc.Het plannen van taken en rapporteren van voortgang aan het projectteam.Het oplossen van technische vraagstukken en het bieden van oplossingen voor structurele uitdagingen.Het deelnemen aan interne en externe projectvergaderingen, evenals bezoeken aan werven en offshore-werkzaamheden.
Field Service Technician/Power Generation
Location: Perth
Branche: Infrastructure
Expertise: Production & Manufacturing
Experience: 2 years
Introduction : Our client is a multi-award-winning global specialist in the engineering, installation, and maintenance of distributed power generation solutions. They are now seeking Field Service Technicians to join their team based at Jandakot. Description : The successful candidates will play crucial role in ensuring the optimal performance and reliability of Gas/Diesel power generation equipment. This is a fantastic opportunity for a suitably qualified Diesel Mechanic, Motor Mechanic or Mechanical Fitter seeking to transition into the power generation industry. The role offers extensive OEM certified training and support to apply your mechanical expertise, with responsibilities including; * Performing maintenance, Engine overhauls, diagnostics, and repairs on power generation equipment * Troubleshooting technical issues and implementing solutions to minimise downtime and ensure peak performance. * Collaborating with a skilled team to execute preventive maintenance schedules and inspections. * Maintaining accurate records of services performed, parts used, and repairs completed. * Adhering to safety protocols and industry regulations while working in diverse environments. * Contributing to a positive team environment and sharing knowledge with colleagues. Requirements : * Trade qualification as a Diesel/Motor Mechanic, Mechanical Fitter, or related field. * Strong mechanical aptitude and a passion for learning about power generation technology. * Excellent problem-solving skills and the ability to work effectively under pressure. * A proactive approach to challenges and a commitment to delivering quality results. * Effective communication skills and the ability to interact professionally with clients and team members. Offer : This company offers a negotiable salary package, career progression and fantastic staff retention.Please note all applications will be treated with the utmost confidence and due to the high number of applications received; only successful candidates will be contacted.If you are interested in this opportunity, then click the 'apply' button now and please note all applications will be treated with the utmost confidence. Organisation : Brunel is a recruitment and flexible workforce solution provider which connects talented people with opportunities throughout Australasia and around the world. We specialise in highly skilled roles across a variety of technical, professional, trades and craft disciplines, pairing candidates with industry-leading projects and organisations on a contract, permanent or secondment basis.Operating in Australasia since 2001, Brunel has major bases of operation in Perth, Sydney, Brisbane and Port Moresby, which are further backed by the strength and reach of a truly global network spanning over 40 countries, 100+ offices and 45 years of successful operation.Brunel is proud to be equal opportunity employer and encourages applications from Aboriginal and Torres Strait Islander and female candidates
Dy.Manager-Wind Resource Assessment
Location: Gurgaon
Branche: Renewable Energy
Expertise: Planning & Testing
Experience: 4 years
Position: Dy. Manager-Wind Resource AssessmentYOE: 5-8 Years. Contract: On Perm Role.Location: Gurgaon.
Senior Project Manager Offshore Wind
Location: Utrecht
Branche: Offshore (ship crew)
Expertise: Project Management & Services
Experience: 4 years
Identificeer toepasselijke procedures voor de toegewezen scope en beoordeel alle gerelateerde documentatie. Bereid / creëer een gereedheidsplan. Bereid een actielijst voor en volg deze op vanuit het gereedheidsplan, inclusief eventuele vereiste wijzigingen aan documenten (indien nodig) en bestellingen van materialen/uitrusting. Beoordeel bestelde items voor de scope en bevestig de status om ervoor te zorgen dat alles klaar is voor gebruik volgens het schema. Waar van toepassing op hun scope, beoordeel maritieme middelen (lieren, kranen, graafmachines, etc.) om de staat van de machines vast te stellen en te bepalen welke herstelmaatregelen nodig zijn om aan de projectvereisten te voldoen. Als uit de beoordeling blijkt dat verdere actie nodig is, identificeer en ontwerp een hersteloplossing en stem de implementatie af die acceptabel is voor het projectteam. Zorg ervoor dat geplande activiteiten adequaat zijn beoordeeld op risico's in overeenstemming met de vereisten van de werkgever. Voer dagelijkse toolboxgesprekken met alle belanghebbenden en personeel die bij activiteiten betrokken zijn, zodat iedereen duidelijk is over zijn/haar rollen en verantwoordelijkheden. Observeer eventuele vereiste bedrijfstests op machines en apparatuur. Implementeer eventuele vereiste technische aanpassingen om gereedheid te waarborgen. Mobiliseer voor de betreffende locatie en zorg voor naleving van de processen en procedures van de werkgever. Inspecteer de staat van alle projectapparatuur die wordt opgeslagen, behandeld, vervoerd of gespoeld en de staat van permanent geïnstalleerde materialen. Volg eventuele vereiste wijzigingen in het management op (indien nodig). Houd een overzicht bij van as-built voltooingen en documentatie. Houd een register bij van wijzigingen en geleerde lessen. HSEQ-rapportage in overeenstemming met de bedrijfsvereisten.
Electrical Technician - Saudi Arabia
Location: Manama
Branche: Oil & Gas
Expertise: Project Management & Services
Experience: 4 years
Work location is in Saudi Arabia;Execute the Planned Preventative Maintenance (PPM) schedule and ensure full preventative maintenance is carried out for electrical and instrumentation equipment and machinery in a timely manner in compliance with Company policies and procedures, customer specifications and industry standards;Perform the configuration, calibration, maintenance and programming of electrical and instrumentation equipment/machinery as per established SOP’s;Schedule and conduct electrical and instrumentation maintenance works on related equipment as per contractual/customer requirements and specifications whilst adhering to quality and industry standards;Conduct fault diagnosis investigations, carry out corrective maintenance and repairs for electrical and instrumentation equipment to ensure machines/equipment are in good working condition;To provide on-site support to customers as and when required to ensure all equipment and machinery conform to the relevant standards and regulatory requirements.
Control System Technician (Petrochemical)
Location: Mesaieed Industrial City
Branche: Renewable Energy
Expertise: Planning & Testing
Experience: 5 years
Full working and maintenance knowledge of electrical equipment in hazardous Area zonesGood knowledge in in functionality of PLCs, F&G, ESD, DCS systems and field bus technology.Fair knowledge in computer skills, communication skills, meets operations, maintenance and project teams for trouble shooting.Perform the effective engineering support, integrity and availability of all Systems & Control in adherence with Company and relevant international standards being followed within company and appropriate Safety codes to achieve their maximum integrity, availability and efficiency in cost effective manner.Performs work that involves conventional engineering practice but may include complex features such as resolving conflicting design requirements, unsuitability of conventional system & control requirements and/or difficult coordination requirements.Review of all detail engineering documents of Vendor/ Contractor and attending all technical meetings as focal point from system Management side during contract execution for In house and ED/EM projects.Reviews defect reports for all Systems & Controls equipment within the assigned areas and initiates action as appropriate. Perform and ensures the effective support for DCS, ESD, SCADA, PLC control systems, Heavy Duty Turbine Control Systems, Compressor Control Systems in adherence with company and relevant international Compressor Control Systems in adherence with OP and relevant international standards being followed within company and appropriate Safety codes to achieve their maximum integrity and efficiency in cost effective manner.
Account manager IT Eindhoven
Location: Eindhoven
Branche: Information Technology
Expertise: IT & Shared Services
Experience: 2 years
Als Accountmanager in het IT-team bij Brunel draag je diverse verantwoordelijkheden. Je speelt een 360-graden rol in het strategisch uitbouwen en onderhouden van je netwerk van kandidaten. Het hoofddoel is om zowel de kandidaten als de klanten tevreden te stellen door actief te toetsen of de verwachtingen worden waargemaakt. Verder ben je verantwoordelijk voor recruitment en talentmanagement. Door voortdurend in contact te staan met je doelgroep, ontwikkel je inzicht in hun behoeften en kun je beoordelen op welke projecten van onze klanten ze van toegevoegde waarde kunnen zijn. Het vinden van de juiste .NET Developers en .NET Tech Leads is je ultieme doel. Je toont de kandidaten dat Brunel geeft om hun toekomst. Dit geldt zelfs voor degenen die al geruime tijd bij ons zijn. Je doet dit bijvoorbeeld door mee te denken over de trainingsmogelijkheden die we kunnen bieden en door regelmatig contact te onderhouden om hun welzijn te peilen.
Instrument and Electrical Technician II
Location: Baker, MT
Branche: Conventional Energy
Expertise: Production & Manufacturing
Experience: 3 years
* Installs and maintains electrical and instrument equipment in compliance with all rules and practices.* Tests and repairs electrical and instrumentation systems utilized by production equipment to ensure adherence to established performance levels and product quality.* Evaluates electrical systems and instruments to establish plans for repair.* Documents and verifies problems and actions taken.* Plans, updates, and oversees all activities within his or her areas of responsibility according to the laws, regulations, standards, specifications, and procedures. Special emphasis must be placed on health, safety, and the environment* Supports and encourages team effort between operations, engineering, and projects groups* Provides input and reviews the control specifications and work practices* Responsible and accountable for electrical and control systems as defined in the Work Management Manual* Has the knowledge to apply and follow work permits through Permit To Work System (PTWS) as discussed in the Work Management Manual* Ensures the quality and timely completion of work scheduled by the Maintenance Program* Develops personal and team technical skills (for example, new regulations, equipment, methods, and others)* Attends and instructs (as needed) technical meetings, to keep instrument and electrical technicians informed of the latest specifications, codes, procedures, and technology* Develops and maintains open communications on electrical and control issues (for example, safe work practices, training, materials, and others) with co-workers* Supports work prioritization to maximize effectiveness and to complement the efforts of other work groups* Provides technical support to other Technicians for maintenance and troubleshooting on company's instrument and electrical systems* Is able to generate Management of Change requests (MOCs) on electrical and control-related equipment and installation and can follow up with installation inspections consistent with Operations Integrity Management System (OIMS) Element 3* Constructs, monitors, and inspects new installations for their consistency with the mission and recommend upgrades as necessary* Acts as a stand-in for the Instrument and Electrical Lead position as needed
Common wind technician responsibilities
- Conducting inspections and repairing faults on all turbine systems, including mechanical, electrical, and hydraulic components;
- Performing routine maintenance to prevent turbine problems;
- Maintaining inventory and ordering components as needed;
- Replacing old or malfunctioning pieces of turbine;
- Collecting data from the turbine for testing and analysis;
- Scaling wind turbine towers with a safety harness to carry out inspection and repair work;
- Updating the manager on maintenance, repair, and work progress;
- Traveling to wind turbine sites to fix a turbine;
- Inspecting or supervising junior wind technicians and other team members;
- Following strict safety protocols to ensure one’s safety in extreme working conditions;
- Assuring the safety of team members.
Qualifications for wind turbine technicians
Wind technicians should have at least a technical or trade certification from a vocational institute. A Bachelor’s degree in a technical field such as Engineering, Computer Science, Renewable Energy is advantageous.
Additional supporting skills and experience include:
- 1-2 years of experience;
- Strong problem-solving skills to diagnose and overcome challenges;
- Good understanding of structural, mechanical, and electronic components, hydraulic systems, and other technical hardware and software;
- Physically fit and able to lift heavy equipment, bend, and climb;
- Strong verbal and written communication skills to be able to work easily with customers, engineers, technicians, and other team members;
- Some work experience gained through an apprenticeship or in a similar role is an advantage.