Are you passionate about using your knowledge of chemistry, physics, and mathematics to create new substances and enhance the properties of existing materials? If so, a career in Materials Engineering may be the perfect fit for you. As a Materials Engineer, you will have the opportunity to work in research, manufacturing, and materials development across a wide range of industries. You will use scientific principles to investigate, modify, and control the behaviour of substances, ultimately selecting materials for specific products and developing production procedures.

Apply now for a job as a Materials Engineer!

Quality Engineer

Location: ROBINSON 77

Expertise: Institutional Healthcare

Experience: 1 years

Our client is a well established medical devices company with a strong product portfolio. Work with cross-functional teams to ensure implementation and/or maintenance of QMS that are appropriate for Medical Devices / Life Sciences Manufacturing / Medical Devices Distribution and Services, complies with Commercial/Distribution Quality System such as GDPMD and may also include, but not limited to FDA 21 CFR Part 820, ISO 9001, ISO13485 and other applicable regulatory and statutory requirements. Support external audit by certification body and/or regulatory inspections by regulatory agencies e.g. US FDA. Coordinate, plan and perform internal audits of processes, facilities and documentation to assure compliance with internal procedures, FDA 21 CFR Part 820, ISO 9001, ISO 13485 and GDPMD regulations and requirements. Establish, maintain and update relevant QMS documentation. Support in the preparation of generation of metrics and reports to support Quality Management Review. Maintain calibration records for all manufacturing tools and equipment. LMS administrative role for local procedure and practice. Interface with production, process, and test engineering to ensure that products are consistently produced and controlled as per ISO / Part 820 requirements Provide QA support in the design, development, sustaining and production of life science / medical device products, facilitating the application of change controls, inspection and testing, risk management activities and quality plan for new product introductions / existing products are in order to sustain product competitiveness while maintaining compliance to domestic and international regulations and standards. Conduct customer feedback/complaints and trend review, and drive appropriate continual improvement implementationWhat you should do nowApply to this job ad or send your CV across to me at e.ng@brunel.net for a confidential discussion.(Brunel International South East Asia Pte Ltd, Registration Number: 199603098R | Company License Number : 16S8067 | Eve Ng EAP Registration Number R2198025.)

Senior / Principal E&I Engineer

Location: ROBINSON 77

Expertise: Embedded Software

Experience: 4 years

Our client is a fast growing pharmaceutical companyResponsibilities Develop E&I specifications based on project requirements and standards. Involve or conduct feasibility studies, instrument criticality and risk assessments for instrumentation and electrical systems Develop and maintains various engineering documents such as project instrumentation specifications & instrument catalogue, preferred vendors list, specifications, equipment list, layouts, etc. Evaluates and specifies instruments and electric devices designed for process & utility applications Creates and maintains instrument objects and datasheets and loop diagrams in project database Collaborate with other engineering disciplines to ensure integrated designs. Review and approve design documents, drawings, and calculations. Responsible of procurement by developing URS for purchase and leading/support bidding process including inspection of equipment and materials Working together with the Qualification team & user QA team for preparation and maintaining of the documents for the Commissioning & Qualification of the instrumentation. Ensure compliance with design specifications, codes, and standards during installation Supports and arrange calibration activities on site prior to commissioning, qualification or handover to operational Manage contractors and subcontractors involved in installation activities. Review, support or develop commissioning plans, qualification protocols and procedures for electrical and instrumentation systems. Perform or oversee the functional testing of electrical equipment, control systems, and instrumentation devices. Troubleshoot and resolve commissioning issues and discrepancies. Support or execute qualification tests and inspections according to approved protocols. Document qualification results and deviations, and ensure compliance with validation requirements. Responsible to research and select appropriate master calibrators for various instruments used in the workshop. These calibrators serve as reference standards to ensure the accuracy of measuring instruments. Responsible to set up calibration workshop, procure and maintain standard calibration equipment such as multimeters, temperature and pressure calibrator, signal generator, Mass and Weight Calibrators, etc., needed to perform calibrations accurately as per procedures. Collaborate with all stakeholders to ensure smooth transition and startup of electrical and instrumentation systems. Provide training and support to team members and maintenance personnel on system functionalities and procedures and compliance with relevant standards. Create and maintain a plan/list of all instruments requiring calibration in the workshop and field. This plan/list should include information such as instrument type, serial number, calibration due dates, and historical calibration data within the Maximo system. Establish a calibration schedule based on instrument types, usage frequency, manufacturer recommendations, and regulatory requirements to ensure timely calibrations and compliance.What you should do now Apply to this job ad or send your CV across to me at e.ng@brunel.net for a confidential discussion.(Brunel International South East Asia Pte Ltd, Registration Number: 199603098R | Company License Number : 16S8067 | Eve Ng EAP Registration Number R2198025.)

Utilities / Facilities Engineer (Pharma)

Location: ROBINSON 77

Expertise: Embedded Software

Experience: 4 years

Our client is a fast growing pharmaceutical companyResponsibilities Responsible for the development of the URS, Engineering Technical Specification, and Maintenance Procedure for Utilities/Facilities services, equipment, and systems. Oversee the design, installation, and maintenance of utilities/facilities systems such as ACME, electrical, water, and gas distribution systems, Pest Control, Lifts, Fire Protection System, Wastewater Treatment Plant, lighting, site infrastructure, waste management etc. Collaborate with project teams to design and develop efficient and compliant biopharma manufacturing facilities. Participate in facility layout, design review, and equipment selection to ensure adherence to cGMP (uidelines and regulatory requirements. Contribute to the preparation of facility specifications, engineering drawings, and equipment specifications. Evaluate and select suppliers for utilities and infrastructure components, ensuring high-quality standards and cost-efficiency. Carry out technical alignments and bid tabulation for tender packages for order placement and participate in the execution of the projects. Monitor and oversee construction projects to ensure compliance with design plans, safety regulations, and project schedules. Conduct facility walk-throughs and inspections to identify any potential issues or deviations. Support/lead the Operation Readiness of the Utilities/Facilities infrastructure or systems transiting from project to operation phase. Conduct scheduled facility inspections in accordance with the maintenance schedule, ensuring adherence to SOPs, regulations, and safety standards. Identify energy-saving opportunities and optimal resource allocation strategies. Conduct scheduled facility inspections in accordance with the maintenance schedule, ensuring adherence to SOPs, regulations, and safety standards. Identify energy-saving opportunities and optimal resource allocation strategies. Optimize the scheduled maintenance of plants and equipment during overhauls and inspections. Analyse mechanical or system defects, suggest corrective actions, and resolve problems. Implement plant enhancement initiatives to improve plant dependability and performance. Direct processes for improving the plant's availability, efficacy, and cost- effectiveness. Develop technical specifications and manage procurement for maintenance requirements. Accountable for relevant EHS audits, energy management, and energy conservation initiatives in businesses.What you should do nowApply to this job ad or send your CV across to me at e.ng@brunel.net for a confidential discussion.(Brunel International South East Asia Pte Ltd, Registration Number: 199603098R | Company License Number : 16S8067 | Eve Ng EAP Registration Number R2198025.)

Lead Quantity Surveyor

Expertise: Embedded Software

Experience: 3 years

To lead Project's quantity surveyors team with integrity, supporting the project organization as a subject matter expert for quantity surveying, This role to be perform assigned project Quantity Surveying activities with administrative post-subcontracts (Block-K) documents (e.g. Major Fabrication Subcontracts Agreement and Related Exhibits A-J) with accountability.Key Accountabilities Incorporating best practices in quantity surveying policies as well as considering project-specific needs to ensure reasonable standardization of quantity surveying practices across projects. Plan, select, recruit, train, deploy, develop, and manage the careers of Quantity Surveying Section team members to the satisfaction of project requirements, ensuring qualified resources are always provided on time to maintain project performance. Communicate with Project Controls managers to ensure quantity surveying related issues are properly supported and pipelined for resolution to streamline and debottleneck project execution. Ensure contractual terms and conditions are properly followed and the project gross margin is protected. Guide quantity surveyors and act as specialists on quantity surveying towards the organization to guarantee clarity on contracts quoting, approval, administration, and claim management. Commercial and non-commercial negotiations are conducted in diligent, compliant, and transparent manner, driving the lowest total cost of ownership through the project lifecycle (proposal, EPCCI, operations and decommissioning). Observe basic Subcontracts agreement’s core points of General costs and Remeasurement costs and it’s mechanism. Thoroughly understand of the “Method of Measurement”, Overall Pricing Schedule or Schedule of rates (SOR) and Support services unit rates as per Contracts Agreement Exhibit-E guidelines. Ensure to determine of Base scopes and additional scopes. In depth knowledge on Excel formulas such as Pivot table, V-Lookup, Concatenate, $sign freeze in column & rows and its mechanism, including error reading and understand of the formatted documents from Subcontractor in a easiest and efficient way of computations. Close coordination with Construction, Engineering, Planning and Quality team to update actual progress status and identify potential change works and understand it’s root cause of change. Update on SI-Log / COR or CR, CO-Log and monitoring change work completion status Update on a timely manner and periodical distribute to PMT liaising with Snr. Lead QS. Verify Remeasurement Quantities submitted by subcontractor as guided by method of measurement in contracts and liaising with Project Lead QS using Standard format as per Subcontracts Agreement. Verify reimbursable or Cost-Plus documents (Chinese, Portuguese, other) submitted by subcontractor and update to Project Lead QS of the outcome and notify immediately if any discrepancies found. Verify Custom clearance documents (Chinese, Portuguese, other) submitted by subcontractor and update to project Snr. Lead QS of the outcome and notify immediately if any discrepancies found in cost and inappropriate documents found. Assess cost of the T&M works and timesheet verifications liaising with subcontractor’s counterpart to finalize the appropriate cost impact. Material reconciliation against with free issued (MFE) materials and As built quantities and identify the gap, if found over issued the relevant cost to be back charged to subcontractor Assist the project Snr. Lead QS for Final Closure accounts and safe keep Project Data in appropriate J-Drive folder / Share points as directed by the head of the department.Qualifications Bachelor of Engineering Degree, Engineering Diploma, Marine Degree / Diploma Graduates or Oil & Gas related Minimum 5-8 of Experiences in Oil & Gas especially FPSO shipbuilding or Shipyard experiences.Brunel International S.E.A Pte. LtdUEN No: 199603098REA License No: 16S8067Shinu Alexander: R1657042

Quantity Surveyor

Expertise: Embedded Software

Experience: 5 years

We are seeking an experienced Quantity Surveyor to join our team for an FPSO project. This role requires a seasoned professional with 15-20 years of experience in project cost control, contract management, and quantity surveying within the oil and gas industry. The successful candidate will be responsible for overseeing cost control and commercial management throughout the FPSO conversion, ensuring accuracy and compliance with contractual obligations.Key Responsibilities: Manage and oversee all quantity surveying activities, ensuring that project costs align with the budget. Develop and implement cost control measures and maintain project cost forecasts. Conduct contract reviews and manage variation orders, ensuring all changes are properly documented and justified. Prepare, submit, and review tender documents, cost reports, and project forecasts. Review contractor claims, assess scope of work variations, and negotiate claims based on contract documents and specifications. Collaborate closely with project engineering, procurement, and construction teams to ensure alignment on project deliverables and cost targets. Establish and maintain effective communication and contract administration systems. Conduct regular site visits and measure physical progress to validate contractor claims. Prepare and submit weekly and monthly reports, analyzing project costs, progress, and any deviation from the budget.Qualifications: Bachelor’s degree in Engineering or a related field. 15-20 years of experience in quantity surveying or project cost control, specifically in FPSO or similar offshore oil and gas projects. Proven expertise in cost management, contract negotiation, and claims assessment. Strong understanding of construction contracts, specifications, and project management principles. Proficiency with EVM, S-curve, and KPI indicators for progress measurement. Excellent communication skills with the ability to liaise effectively with contractors, vendors, and internal departments. Proficiency in project control software and tools.Preferred Experience: Previous experience working in shipyard environments. Familiarity with FPSO conversion and refurbishment processes.Application: This position offers a challenging and rewarding opportunity to work on a high-profile FPSO project. If you meet the experience requirements and are ready to take on a dynamic role in a leading FPSO project, we encourage you to apply.

Materials engineer job profile

As a Materials Engineer, your main responsibility is to improve the performance of materials or create new materials that can advance technologies and products. You will work with a variety of substances, ranging from ceramics and plastics to polymers and industrial minerals. Your role will involve testing materials for heat resistance, corrosion resistance, and other qualities, as well as analysing data using computer modelling software. 

 

You will also assess the environmental impact of materials and ensure that products comply with national and international standards. In addition, you may be responsible for identifying and solving material failures or production problems. Collaboration with colleagues in various departments, such as manufacturing, technical support, and marketing, will be crucial.

Materials engineer responsibilities

Key responsibilities of Materials Engineers may include:

 

  • Selecting the best materials for specific purposes based on their properties
  • Analysing data using computer modelling software
  • Assessing the environmental impact of materials and products
  • Developing prototypes and testing them
  • Overseeing quality control processes
  • Liaising with suppliers, customers, and manufacturing staff
  • Supervising engineering and technical staff

What is a biomaterials engineer?

A biomaterials engineer specialises in creating materials that interact with biological systems, such as medical devices and tissue scaffolds. This differs from a materials engineer, who works across various industries to develop and optimize materials for different applications, including electronics and manufacturing. Biomaterials engineers focus on biological compatibility, while materials engineers have a broader range of applications.

Materials engineer qualifications

To pursue a career as a Materials Engineer in Singapore, a strong educational background is essential. In high school, it is recommended to focus on maths and science courses to develop a solid foundation. As an undergraduate student, majoring in engineering, such as materials or civil engineering, will provide you with the necessary skills for the job. While a master's degree is not always required, it can enhance your career prospects. Some universities offer combined bachelor's and master's degree programs.

 

In terms of training, internships during college and entry-level positions in manufacturing and materials can provide valuable hands-on experience. Certification is not typically required for a materials engineer role, but it can demonstrate your commitment to the field.

Required Qualifications:

  • Bachelor's or master's degree in material science or engineering, preferably materials or civil engineering
  • Relevant internships or entry-level experience
  • Obtain a professional engineering license by passing the Fundamentals of Engineering (FE) and Principles and Practice of Engineering (PE) exams.
  • Complete a 4-year training period under a licensed professional engineer.
  • Certification Application: Apply for your official certificate from the Professional Engineers Board (PEB), usually within five years of passing the PE exam.

Read more